Shanghai White Lai Road Bridge Machinery Co., Ltd.
Crushing & Screening Equipment Manufacturer and Integrated Solution Provider
Add to Cart
4.5FT Spring Cone Crusher In Construction Waste Gold Recycling 200 TPH Capacity
4.5FT Spring Cone Crusher for Construction Waste Gold Recycling 200TPH Capacity WLC1380 Specifications:
| Name | Symons Spring Stone Cone Crusher Machine |
| Model | 4.5FT / WLC1380 |
| Cavity | Coarse Liner |
| Max Feed Size | 215mm |
| CSS | 19-51mm |
| Power | 185-220KW |
| Weight | 27t |
| Capacity | 200-440t/h |
| Dimension | 2830x2200x2783mm |
Symons Type Spring Hydraulic Compound Cone Crusher Machine Component Parts:
Symons Type Spring Hydraulic Compound Cone Crusher Machine is mainly composed of a frame, a drive shaft, an eccentric sleeve, a spherical bearing, a crushing cone, an adjusting device, an adjusting sleeve, a spring and a discharge port.
(1) Crusher main frame assembly: The main frame of the crusher consists of the upper frame and the lower frame. The two are connected by hydraulic cylinders. There are wear-resistant lining plates and protective covers. The upper frame is welded and the upper port is welded. The copper plate and the lower frame are integral steel castings.
(2) Main shaft assembly: The main shaft of the lower frame of the main shaft and the main frame is assembled with a small interference of the tapered surface. The main shaft has axial and radial lubricating oil holes.
(3) Eccentric bushing assembly: The eccentric bushing is internally provided with a high-lead bronze bushing fixed by screws; the lower part is bolted with a large bevel gear and a thrust bearing, wherein the upper thrust bearing is a forged steel piece and a lower thrust bearing It is a high-lead bronze piece; in addition, a weighted component fixed by bolts is mounted on the eccentric bushing, and the inside is filled with lead and a wear-resistant protective lining is installed.
(4) Moving cone assembly: the upper part of the moving cone is fixed by bolting to the feeding plate assembly, and the lower part is equipped with a spherical bearing bush, which can be matched with the spherical steel tile installed in the sleeve; the moving cone is externally mounted with high manganese steel. The moving cone liner, the gap between the moving cone and the lining plate is filled with epoxy resin; the upper and lower high-lead bronze bushings are installed inside the moving cone.
(5) Fixed cone assembly: the upper part of the fixed cone is installed with a feeding hopper; the interior is equipped with a high-manganese steel wear-resistant lining plate fixed by large-diameter bolts, and the fixed cone and the lining plate are filled with epoxy resin; The outside is a trapezoidal thread that mates with the adjustment ring.
(6) Adjusting ring: The adjusting ring is a component consisting of an adjusting ring, a clamping ring, a cam follower and a hydraulic motor; the clamping ring has a trapezoidal thread and can be connected with the fixed cone; the upper part of the adjusting ring is provided with a main frame fixing pin and A guide bar to prevent the adjustment ring from rotating within the main frame.
(7) Unit lubrication device: It consists of oil tank, motor oil pump, filter device, cooling device and control device. For example, the cone crusher of Yantai Xinhai Mining Machine uses dry oil or water to seal the dust, so that dust and impurities can not enter the body, ensuring the cleanliness of the running oil.
(8) Horizontal drive shaft assembly: a high-power main drive motor, which drives the bevel gear and the eccentric bushing on the small bevel gear on the horizontal shaft through the V-belt drive: the box of the horizontal shaft is a whole cast iron piece, which is bolted to On the main rack.
4.5FT Spring Cone Crusher for Construction Waste Gold Recycling 200TPH Capacity Pictures:
